• |
The display uses OLED(organic light emitting
diode).
OLED is an advanced display which is self light emissive,
high contrast, high response, low power consumptive, and
large view angle. It uses optimal technology for instant
readability without afterimages of flicker even when seen
from the passenger's seat. |
• |
Real-time digital information includes speed,
oil temperature, water temperature, oil pressure, fuel pressure
and exhaust temperature. Sensor sets need to be purchased
separately to display the information on pressures and temperatures. |
• |
Vehicle performance data and peak values are
placed in memory for 3 minutes, allowing examination of
data after running the vehicle.
*Defi-Link Control Unit II has a 3 minute memory. Defi-Link
Control Unit has a 40 second memory. |
• |
When the RPM signal wire is connected to Defi-Link
Control Unit II or Defi-Link Control Unit, 2 warning levels
can be set in addition to the warning setting made by Control
Unit II or Control Unit, enabling the setting of a total
of 3 warning levels(Tachometer Triple Warning Mode). |
• |
When the water temperature sensor is connected,
the warm-up condition can be monitored. |
• |
A graphic animation plays after the ignition
is turned on or off(Opening Mode/Ending Mode). |
• |
An easily recognizable graphic on each setting
screen helps guide easy setting of warnings for Defi-Link
Meters and Step Graph(Setting Assistance function). |
• |
The Warning LED lights when the set warning
value is exceeded for oil temperature, water temperature,
exhaust temperature and engine RPM. The Warning LED lights
when measured value drops below the set warning value for
oil pressure and fuel pressure. |
• |
Trouble locations are shown by graphics so
that connection problems can be quickly corrected(Self-Diagnosis
function). |
• |
The structure of the mounting base allows
height and angle adjustment so that it can match the shape
of the instrument panel. |
• |
The Defi-Link Indicator(sold separately) can
be connected to the display. |
