Defi
D-Gauge |
| PRODUCT FEATURES |
| Exclusive gauges for USA which are derived from
quick-responsive and high-accurate Defi analog gauges. Boost,
oil pressure, fuel pressure, temperature, exhaust temperature,
and air/fuel gauges' diameter is 2 1/16inches(52mm). Tachometer's
diameter is 4 1/2inches(115mm).
The production of the "D-Gauge
boost gauges" and the "D-Gauge tachometers" has
been ended. |
•
The self-checking functions(Except Boost Gauge, Air/Fuel
Gauge)
It is possible to confirm the performance of the Tachometer
by the movement of the pointer.
a. Wire disconnection check This function is meant to
report any in-proper connections. Broken or disconnected
sensor or sensor wire. The pointer will wave between
250 and 260 degrees.
b. Short circuit check
This function is meant to report any short circuit on
the sensor or sensor wire. The pointer will wave between
10 and 20 degrees. |
|
It is
not possible to check short/open circuit of power wiring
|
•
Stepping Motor drive(Except Boost Gauge)
a. Quick Response
Gauges pointers driven by stepping motor have a smooth
instantaneous response to rapid acceleration of high performance
vehicles.
b. High accuracy and light weight
Maximum angle of deflective, 270 degrees is controlled
by the microcomputer up to 2,300 times to provide high
precision in the accuracy of information generated.
c. Freedom of installation(Except Boost Gauge)
There is no "dumping of oil." The meter can
be installed at any angle. |
|
•
Attractive design
a. LED Lamps
The light is produced from high intense LED lamps. A bright
transparent amber gauge dial and a red instrument pointer
are used in the gauges to increase visibility at night
and low-light applications.
b. Black bezel with red arrow
Bezel has a RED arrow and can be rotated by finger sand
thumb, so that you can indicate your critical point, where
you want.
c. Removable Back Bezel
The black bezel is removable, so you can choose either
black bezel or aluminum bezel |
|
|
Defi
D-Gauge Dimensions |
/

Unit:mm(1mm=0.039in)
|
| D
- Gauge |
| DF03703 |
DF D52
Oil Press White *2 (0 to +145PSI) |
$240.00 |
| DF03704 |
DF D52
Oil Press Black *2 (0 to +145PSI) |
$240.00 |
| DF03803 |
DF D52
Fuel Press White *2 (0 to +115PSI) |
$240.00 |
| DF03804 |
DF D52
Fuel Press Black *2 (0 to +115PSI) |
$240.00 |
| DF03903 |
DF D52
Temp White *2 (+86 °F to +300 °F) |
$152.00 |
| DF03904 |
DF D52
Temp Black *2 (+86 °F to +300 °F) |
$152.00 |
| DF04003 |
DF D52
Exhaust Temp White *1 (+400 °F to +2,000 °F) |
$229.00 |
| DF04004 |
DF D52
Exhaust Temp Black *1 (+400 °F to +2,000 °F) |
$229.00 |
| DF04103 |
DF D52
Air/Fuel Ratio White (17 to 10) |
$119.00 |
| DF04104 |
DF D52
Air/Fuel Ratio Black (17 to 10) |
$119.00 |
*Tapered screws for each sensor comply
with PT standard,
except Imperial Model, of which NPT standard screws are supplied for
temperature sensor (*1),
and combination of PT standard screws and included conversion sockets
is used for pressure sensor (*2).
Fizz
Autosports
219-15B Northern Blvd
Bayside, New York 11361
tel 718.631.4001
fax 718.631.7353
|